• Εξυπηρέτηση πελατών:
  • +30 210 5758 915
  • Δευ - Τετ - Σάβ 10:00-15:00 | Τρί - Πέμπτη - Παρ 10:00-20:00
Δωρεάν Μεταφορικά με αγορές άνω των 50€ * | Έως 12 άτοκες δόσεις

Look KEO Blade 2 Carbon CR 12Nm Black

(Κωδ. 00016095)
Το προϊόν δεν είναι διαθέσιμο για άμεση αγορά. Εγγραφείτε στη λίστα των ειδοποιήσεων και θα λάβετε ενημέρωση όταν υπάρχει διαθεσιμότητα
139,90€
Κατόπιν παραγγελίας
Με πιστωτική κάρτα από
11,66 €/μήνα σε 12 άτοκες δόσεις

Δωρεάν μεταφορικά με αγορές άνω των 50€ *

Τα Keo Blade Carbon 2018 έρχονται με τα λαμάκια σκληρότητας "12" τοποθετημένα και στην συσκευασία περιλαμβάνονται και τα λαμάκια σκληρότητας "16"

Βάρος : 110 γρ. / πετάλι
Επιφάνεια : 700mm²

Designed to win, the new KEO BLADE CARBON improves the experience associated with the use of blade technology in a clipless pedal. This new version is the result of experience gained during years of development in the heart of our manufacturing facility and to continual improvements made thanks to daily input from the greatest of champions.
Lightweight, aerodynamic, powerful, the new KEO BLADE CARBON has all the assets to allow you to improve and optimize your performance until victory is yours. It is for these reasons that KEO BLADE CARBON is the unanimous choice of many champions who have made it a weapon of choice in the conquest of their greatest achievements.
The KEO BLADE CARBON has the best weight / power ratio in its class.
Its new design completely integrates the blade for unrivaled aerodynamics. Equipped with a carbon body and blade, the Blade Carbon is available in a Ti version (titanium spindle) that weighs a mere 95g per pedal, or in a CrMo version (chromoly spindle) for a weight of 110g per pedal. It is available in three tension release levels: 12,16 and 20.

OPTIMIZED SPINDLE: MORE POWER TRANSFER AND RELIABILITY
The spindle of the new CARBON BLADE has been completely redesigned. It is built around an oversized axle and spindle that pass through internal roller and needle bearings located directly under the pedal platform. This new construction allows a gain of approximately 2 to watts at 100 rpm.
The distance between the roller and needle bearings has been increased by 25%. This provides more rigidity along the entire length of the spindle, and as a consequence, improved power transmission.
Special attention has also been given to ensure that it is water resistant. Weather resistance has been improved by 120% for even more reliability and longevity. To accomplish this, the new spindle received an updated endplug with an o-ring washer and has also been equipped with an internal, double-lipped seal.
LOOK axles are only approved after a rotational test of 2 million cycles at 100 rpm with a load of 90 kg on the center of the pedal and an eccentric rotation (which creates stress on each revolution). This is equivalent to a sprint by Andre GREIPEL of 1700 watts at 100 rpm for 333 hours! This test is much more demanding than the current standard, the ISO 4210.

ULTRA-POWERFUL PLATFORM
To meet the demands of the most demanding cyclists, especially competitors, the pedal-cleat system must allow efficient power transfer thanks to a broad and rigid platform.
The platform of the CARBON BLADE is fitted with a 67mm-wide stainless steel plate, optimizing the cleat/pedal contact areas, regardless of pedaling angle.
With 700 mm² of surface area, the CARBON BLADE offers an optimized contact platform for an efficiency and power transfer that is unmatched on today’s market.
Its weight / power ratio positions it well above the competition.

BODY AND BLADE CARBON TECHNOLOGY
Using a carbon body lightens the weight of the pedal and provides an additional gain in stiffness for improved power transfer.
BLADE technology is a major technical innovation in the history of the automatic pedal because of its many benefits: LIGHTWEIGHT, AERODYNAMIC, ULTRA-SECURE WHEN CLIPPING IN AND OUT.

Specifications

USE: Race
BODY: Carbon
SPINDLE: Chromoly Steel +
THREADING: 9/16 X 20 mm
BEARINGS: 1 roller bearing, 1 needle bearing
STACK HEIGHT: 14.8 mm
DISTANCE PEDAL SPINDLE / CRANKARM: 53 mm
PLATFORM WIDTH: 67 mm
PLATFORM SURFACE AREA: 700 mm²
TENSION: Pedals come installed with “12” carbon blades + additional “16” carbon blades
(“20” carbon blades sold separately)
CLEATS: Keo Cleats-Grey
FLOAT: 0 °, 4.5 ° or 9 ° according to the cleat color (Black, Grey, Red)
PEDAL WEIGHT: 110 gr (288 gr per pair with cleats and screws)
COLORS: Black
ACCESSORIES: 2 sets of blades +1 pair of Keo Cleats-Gray + screws
WARRANTY: 2 years (LOOK Warranty policy)

{youtube}v=TkHUl-kP2NM{/youtube}


*Το πραγματικό προϊόν ενδέχεται να διαφέρει από την εικόνα.

SERVICES AREA

topcycles shimano
shimano-service-center
Το ποδήλατο σας δεν είναι μόνο ένα μέσο αναψυχής, άθλησης ή μετακίνησης. Είναι ένα όχημα, του οποίου ο κινητήρας και οδηγός είστε εσείς.
ΠΕΡΙΣΣΟΤΕΡΑ...
BIKE FITTING
Οι υπηρεσίες μας μπορεί να διαρκέσουν από 1 λεπτό μέχρι μερικές ώρες, από μια απλή αλλά καλή συμβουλή σχετικά με το μέγεθος του σκελετού, μέχρι μια λεπτομερή ανάλυση...
ΠΕΡΙΣΣΟΤΕΡΑ...
TopCycles bike fitting